Hi-Pressure Pilot Assemblies are designed to use gas supplied at 10 PSIG or more. They produce a stiff, sharp flame, which will not blow away from the burner tip and which will stand heavy drafts and cross currents.

Atmospheric CP pilots are Designed for use on Coil Cage burners and are easily mounted with the use of a universal bracket (01510 series).

Draft-Lite Pilots are designed to operate over a wide range of draft conditions. All are fitted with threaded outlet connections for secure mounting to burner cages.

High Capacity Draft-Lite Pilots are designed for 1.0” to 2.5” W. C. draft conditions. For use where draft and burner size require a heavier pilot flame. The 6TYS-10 pilot has a threaded nozzle for use in Style B cages.

Atmospheres Pilot Torches are made in four sizes and consist of a Pilotjector with cock, burner nozzle, and nipple. Elbow and two nipples may be used where desired.

Baso Pilots type AP are used on atmospheric burners as shown in Figures 1, 2, and 3 and are available for types of gases shown in Table 1. Models include AP Baso Pilot with pet cock and mounting bracket.

The “PB” Assembly consists of a blast burner tip, gas-air Midget Mixer, zero governor, combination ratio and shut-off gas cock, air cock and the necessary pipe fittings, assembled as shown.

The 3282-PBST series assembly consists of a threaded blast burner tip, gas-air Midget Mixer, zero governor, combination ratio and shut-off gas cock, air cock and the necessary pipe fittings.