Flanged Mixing Tees are air-gas proportional type mixers designed for low pressure drop operation. Combustion air delivered through a control valve is metered through a precision machined orifice.
Flomixers are proportional mixing devices that utilize the energy of a stream of air at pressures up to several pounds to (1) entrain a combustible gas, and (2) to deliver the mixture at unusually high pressure to the burners.
High Blast Mixers are compact air/gas mixers used in installations where high pressure air is available. These economical units are ideally suited to manual control operation for a wide range of heating applications.
Hijectors are designed to use high pressure gas (up to 35 psig) to entrain all the air needed to make a complete combustible mixture and to deliver it to the burners at the highest possible pressure.
Burners will be supplied with ample secondary air. There is no appreciable friction loss between the mixer and burner due to excessive length, bends or reduction of pipe sizes.
Midget Mixers (MM) are suction type proportional air-gas mixers. Air passing
through the jet produces a suction in the throat section to entrain a fuel gas.
Multiflo Mixers are patented design adjustable high efficiency proportional mixers. The energy of the air passing through the jet produces a suction to entrain a combustible gas and deliver the mixture to the burners.
Pilotjectors are small capacity atmospheric injectors. They are designed along approved lines and are carefully machined to give the best performance possible. Correct alignment of orifice and throat is inherent.
